Shower
Wall Panels | Mermaid
Profile Information | Mermaid
Fitting Information
Shower Panels Technical Details
Mermaid waterproof bathroom shower wall panels
are manufactured of 9mm water-resistant WBP plywood
which has been specially developed for use in “wet
areas” such as bathrooms and showers. High pressure
decorative laminate is bonded to the plywood to give
a completely waterproof surface, with a balancing laminate
to the reverse.
SIZES
Bathroom 2400mm x 600mm x 10-11 mm (nom)
Weight: approx. 12kg; approx. 14kg (Aurora)
Hi-ShowerWall 2400mm x 900mm x 10-011 mm (nom)
Weight: approx. 18kg; approx. 21kg (Aurora)
Wide ShowerWall 2400mm x 1200mm x 10-11 mm (nom)
Weight: approx. 24kg; approx. 28kg (Aurora)
 EDGES
Tongue-and-groove to long edges for concealed fixing's and a neat joint. The short edge's are chamfered to form a “drip nose”.
Hi-ShowerWall*
 One
edge is square to fit into corner profile. This square
edge is also grooved to enable a concealed profile
to be fitted if preferred. The other edge has a fixing
lip with a groove, as on the Mermaid bathroom showers
wall panels. This has the dual benefit of either enabling
concealed fixing when used in conjunction with the
snap-in edging, or of allowing continuation around
the room using bathroom showers panels. The short
edge's are chamfered to form a “drip nose”.
Wide Shower Wall*
All four edges square cut.
*Please note that Bathroom Shower Wall panels are
designed specifically for use in showers enclosures.
They are not tongued and grooved, so can not be joined
together as continual wall lining without the use
of joining profiles.
INSTALLATION
Mermaid showers bathroom shower wall panels can be fitted
to most types of walls, including brick, block or
concrete walls; to plasterboard; to studwork; and
even over the top of existing ceramic tiles. Mermaid
panels can easily be cut to size using normal woodworking
tools, no special equipment is required. Full fitting
instructions are supplied with the panels.
|
